CMR Spitfire Prototype K5054

Vickers-Supermarine Spitfire Prototype, K5054, post modifications after first flightRAF Pageant, Hendon, 27th June 1936, “New aircraft No 2” The Aircraft K5054 is a rather iconic aircraft.  R.J. Mitchell’s design as a Vickers private venture with Rolls-Royce in response to a poor initial design for RAF fighter specification F7/30.  That initial design had fixed landing gear and a gull wing looking much like a single seat Stuka.  Its performance was very disappointing so of course the RAF were not interested.  In 1934 R.J Mitchell was challenged to design something better, ignoring the RAF specifications (which were too restrictive) and taking full advantage of the knowledge at the Supermarine firm.   On initial roll-out and first flight on 5th March 1936, K5054 was not painted, the aircraft having a green tinted preservative on the fuselage and wings, the engine panels were unpainted and the fabric surfaces were all covered in aluminum dope.  The Air Ministry was suitably impressed with the performance and issued a specification drawn to K5054, now F37/34).   Mitchell wanted to make some minor improvements and on 19th March 1936, coming out on 26th March with the Mk I style rudder, landing gear doors, a smaller engine intake and a paint job.  She was finished in a blue-grey color, the actual shade is lost to time and much conjecture exists around it.  Publicly unveiled on at Eastleigh on 18th June then sent to Hendon for the RAF Pageant, where the number “2” was added. On 27th June, 1936 at the RAF Pageant, Hendon, spectators got to see both new aircraft for the RAF, No 1 being the Hawker Hurricane and No 2 being the Vickers-Supermarine Spitfire. Reference:  Spitfire the History The Model CMR make the Spitfire prototype in both configurations, first flight on 5th March and RAF Pageant on 27th June.  The kits are not the same because of the detail differences between those two dates.  CMR have a reputation for very good accuracy, lots of detail and ease of construction (for a resin kit).  This was no exception as construction was fairly straightforward and did not take long. Cleanup was quick, the cockpit being mostly photo-etch with some resin and with superglue the fuselage was together over a weekend.  The wing is one piece and with some fiddling alignment was perfect, very little filler was needed.  The nice thing with resin is that I can fill it, then use a cotton swab dipped in nail polish remover and clean the seam with zero sanding and no damage to the underlying resin. Detail parts were added and the most time consuming item was the vac canopy.  It is very clear and with patience fits perfectly.  While I could have opened the side hatch and canopy this would have been difficult and I typically don’t, so decided to keep it all closed.  The vac canopy being so thin allows some good views inside. I used Gator Glue on the canopy, first time trying and frankly it was a dream.  Worked very well, filled in the joints and after painting looks very nice. After priming I decided to look for the proper paint.  The range in descriptions are:

  • French Blue-Gray
  • Rolls-Royce automotive Blue
  • RLM 76 Hellblau
  • USN Intermediate Blue (1943 color)
  • USN Blue-Gray (1942 color)

There is little help on the web as it seems nobody agrees on the color, and the range of colors for the above are nearly infinite.  Nobody seems to agree on what French Blue-Gray looks like and the RR Blue is similar.  I pulled jars of the 3 paints I had and RLM 76 looked good so I used it.  After it had cured, I put a light gloss coat of Future, decals went on with no trouble and I sealed with a final coat of Future as photos show K5054 had a glossy sheen. All done in just a few weekends, how I like my builds. Definitely a winner and of course a must for any Spitfire fan. Now to get on with that Mk III…


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.